Repairing is a lot easier on your wallet than a new machine!

 

The average cost of repair is less than $50.00 in parts, Most parts coming in around the $20.00 mark, however when gears are damaged, or its the first time you’ve been inside your machine, it’s always great to re-grease your mixer.

An annual regrease will extend the life of your mixer indefinitely, as its the perfect time to tune and inspect your gears and electronics by doing the following!

 
20200603_105806.jpg

Regreasing your machine keeps it running smoothly and prevents oil leakage!

Have you noticed your mixer leaking oil? If not check behind your beauty band and you’ll likely find some liquid gold! The natural life of grease allows oil to separate, coupled with the fact that a majority of the grease gets expelled from the gear tracks while the mixer runs, which allows it to pile up, separate, harden and leak! Its a great time to inspect your gears for excess wear, replacing worn gears prevents excess damage as it prevents them from breaking while in use! Visit the store for access to the best grease and parts available, shipping is always free!

20200618_142809.jpg

Its a perfect opputunity to secure loose screws that loosen via vibration as well as inspect your gears.

Vibration is extremely harmful to the mixers system, over time many crucial set screws loosen due to the vibration. These vibrations cause issues such as, Allowing the machine to engage into gear after its placed in the off position, allowing the attachments to rub the bows removing the enamel and causing excess strain on the gears. It will also prevent your mixer head from jumping while mixing and allow your lock mechanism to not come loose! Make sure to visit the store and order our patented EverDime to prevent your mixer from ever coming out of alignment!

20200604_125238.jpg

coupling a regrease with a speed control adjustment keeps your machine running at it’s maximum potential.

A quick adjustment to the speed control board at the end of the regrease process ensures that your machine is in tune, hitting all speeds appropriately and ensuring your machine is running optimally and not getting sluggish! The set screws for the speed control are effected by vibration causing them to limit your machines potential! If your speed control is as dirty as the one above, I recommend replacing!